3D Printing

Muskogee Manufacturing's Objet30 3D Printer has some of the highest print resolutions and material strengths available. This means printed parts can be used for more than just models and fit testing. Under proper circumstances parts can be used as real world working parts.

Printer Specifications:

• Maximum Print Size: 11.57 in. (294 mm) Length x 7.55 in. (192 mm) Width x 5.85 in. (148mm) Height
• Build Resolution: X-Axis: 600 dpi, Y-Axis: 600 dpi, Z-Axis: 900 dpi
• Layer Thickness: 0.0011 in. (28 micron), (0.03 mm)
• (PDF) Standard Material: VeroWhitePlus FullCure835
• Standard Material Tensile Strength: 7250 - 9460 psi (50-65 MPa)
• Standard Material Elongation at Break: 10% - 25%

Layer Thickness and Surface Finish Comparison

The layer thickness on our printed models is 0.03 mm. Examples of typical layer thickness can be viewed in the "Layer Thickness Example" picture. Photo courtesy of 3dprototypesandmodels.com.au.

Layer Thickness Comparison

Example Printed Part

Layer Thickness Example

The example part was printed on Muskogee Manufacturing's Objet 30 Printer. This picture displays the superior layer thickness and finish quality of the Objet printer. Parts if this quality cannot be achieved with cheaper extrusion type printers that do not offer support material as a feature.